✅作者简介热爱科研的Matlab仿真开发者擅长毕业设计辅导、数学建模、数据处理、程序设计科研仿真。完整代码获取 定制创新 论文复现点击Matlab科研工作室 关注我领取海量matlab电子书和数学建模资料个人信条做科研博学之、审问之、慎思之、明辨之、笃行之是为博学慎思明辨笃行。 内容介绍主要围绕无人机桥梁检查覆盖路径规划展开涉及模型数据读取、网格划分、路径生成、偏移处理、碰撞检测、路径重规划、采样以及相关参数计算与输出等功能。以下为详细解读1. 模型选择与数据读取模型选择通过model变量选择不同模型如dice、portal、pillar等不同模型对应不同的数据文件。数据文件读取根据所选模型打开相应的映射文件如3D 2D maping.txt、面文件如faces.txt和表面法向量文件如surface_normal.txt并使用textscan函数读取文件内容。同时加载特定的轨迹数据如test_traj_simple.mat。2. 数据预处理数据清理对读取的数据进行清理去除字符串中的特定字符如(、)、,等。数据转换将清理后的字符串数据转换为数值型数据如顶点 ID、坐标、UV 坐标、面 ID 以及表面法向量等。数据缩放对于特定模型如pillar对顶点坐标进行缩放处理。3. 三角剖分与可视化三角剖分根据面信息和顶点信息创建 UV 映射和 3D 模型的三角剖分对象。可视化在图形窗口中绘制 UV 映射的三角图和 3D 模型的表面图展示模型的几何形状。4. 网格划分3D 网格划分根据模型的边界和设定的网格大小计算 3D 网格的数量和边界信息。2D 网格划分对 UV 空间进行网格划分计算网格数量和相关参数。5. 计算三角形质心UV 质心计算计算每个三角形网格在 UV 空间的质心并将质心分配到对应的 2D 网格中。3D 质心计算计算每个三角形网格在 3D 空间的质心并将质心分配到对应的 3D 网格中。比例计算计算 UV 到 3D 的比例关系。6. 轨迹转换与可见性分析轨迹转换将 2D 轨迹点转换为 3D 空间中的点并确定每个轨迹点对应的三角形面 ID。可见性分析根据 UV 到 3D 的比例和视野半径确定每个轨迹点在 UV 空间中可见的三角形面并在图中可视化展示。7. 路径偏移路径分段根据轨迹点对应的面 ID将轨迹划分为不同的线段。偏移计算对每个线段进行 3D 偏移计算得到偏移后的路径。8. 碰撞检测与路径重规划碰撞检测检查偏移后的路径是否与模型发生碰撞并标记碰撞点和地面 clearance 信息。路径重规划根据碰撞检测结果对路径进行重规划生成避开碰撞的新路径。9. 路径下采样下采样目标设定设定下采样的目标距离以减少路径点的数量。下采样过程根据点与点之间的距离对路径进行下采样直到满足下采样目标。10. 计算与输出距离计算计算下采样后路径点到模型表面的距离并统计平均、中位、最大、最小距离以及标准差。分布绘制绘制距离的直方图和拟合曲线展示距离的分布情况。可见性计算计算 3D 空间中的可见性并可视化展示覆盖的表面。覆盖率计算计算路径的覆盖率。数据输出将最终的路径和相机指令输出到文本文件中。⛳️ 运行结果 部分代码function interpPoints Hermite_plot(points)% Number of pointsn size(points, 1);% Calculate tangent vectors using finite differencingtangents zeros(n, 3);% Calculate tangent vectors for interior pointsfor i 2:n-1tangents(i, :) (points(i1, :) - points(i-1, :)) / norm(points(i1, :) - points(i-1, :));end% Estimate tangent vectors for the first and last pointstangents(1, :) (points(2, :) - points(1, :)) / norm(points(2, :) - points(1, :));tangents(n, :) (points(n, :) - points(n-1, :)) / norm(points(n, :) - points(n-1, :));% Create parameter t ranging from 0 to 1t linspace(0, 1, n);% Initialize arrays to store interpolated pointsinterpPoints zeros(5000, 3); % Increase 100 if you want more interpolated points% Generate Hermite spline for each segmentfor i 1:n-1% Create a parameter t within the range of the segmentti linspace(t(i), t(i1), 100); % Increase 100 for more interpolated points% Calculate Hermite blending functionsh00 2*ti.^3 - 3*ti.^2 1;h01 ti.^3 - 2*ti.^2 ti;h10 -2*ti.^3 3*ti.^2;h11 ti.^3 - ti.^2;% Calculate interpolated points using Hermite spline formulainterpPoints((i-1)*1001:i*100, :) h00 * points(i, :) h01 * tangents(i, :) h10 * points(i1, :) h11 * tangents(i1, :);end% Plot the original points and the interpolated pointshold on;plot3(points(:, 1), points(:, 2), points(:, 3), .,Color,[0.8500 0.3250 0.0980],MarkerSize,15); % Original pointsplot3(interpPoints(:, 1), interpPoints(:, 2), interpPoints(:, 3), color,[0 0.4470 0.7410],LineWidth,2); % Interpolated pointshold off;grid on;xlabel(X (m));ylabel(Y (m));zlabel(Z (m));% legend(Original Points, Interpolated Points);end 参考文献更多免费数学建模和仿真教程关注领取