erp系统界面_在线直播_网上怎么发布广告_免费精准客源

引言：使用飞控的主通道5-8作为舵机控制输出，需要提前设置好飞控参数，否则无效。本节资料文件尚未整理完毕，整理完毕后会在B站进行视频讲解，并进行开源

1、启动mavros通信，用于订阅遥控器的按键信息，添加机械爪是否使用的安全开关

roslaunch robot_bringup px4.launch

2、启动D435深度摄像头，启动深度与彩图对齐文件

注：先查看深度摄像头是否工作正常，采用USB3.0线

roslaunch realsense2_camera rs_aligned_depth.launch 

3、启动yolov8物体识别节点

roslaunch yolov8_ros yolo_v8_d435.launch

4、启动坐标转换节点

roslaunch object_position object_position.launch 

5、启动机械爪控制节点

rosrun arm_grasp arm_grasp

机械爪控制代码如下：

//说明：舵机方向根据实际调整，这里用的占空比0%表示闭合，100%表示打开
#include <api_library.h>
#include <lib_library.h>
#include <arm_grasp/ctrl.h>
#include <mavros_msgs/RCIn.h>int arm_first  = 0;
int arm_second = 0;
int arm_third  = 0;	
int arm_fourth = 0;
bool target_locked_flag = false;
int  target_locked_area = 100;
arm_grasp::ctrl ctrl_msg;
//无人机遥控器订阅
mavros_msgs::RCIn global_rc_in;
void rc_in_cb(const mavros_msgs::RCIn::ConstPtr& msg)
{global_rc_in = *msg;    	if(global_rc_in.channels[6]>=1250&&global_rc_in.channels[6]<=2050){ctrl_msg.data = true;}else{ctrl_msg.data = false;}    
}/**************************************************
//此处添加计数器防止误识别判断
//补充说明，此处采用摄像头的左上前坐标系，解释如下：
//X为负，表示物体在摄像头的左方，反之右方，正中间为0；
//Y为负，表示物体在摄像头的前方，反之后 方，正中间为0；
//Z表示距离，始终为正
***************************************************/
int last_count    = 0;
int current_count = 0;
int last_diff     = 0;
int current_diff  = 0;
int sum = 0;
int visual_position(string str)
{if(object_pos.header.frame_id == str){position_detec_x = object_pos.point.x;position_detec_y = object_pos.point.y;position_detec_z = object_pos.point.z;}if((fabs(position_detec_x)<=0.03)&&position_detec_y<=-0.03){current_count= current_count + 1;//	cout<<"目标在正前方"<<endl;}else if((fabs(position_detec_x)<=0.03)&&position_detec_y>=0.03){current_count= current_count + 2;//	cout<<"目标在正后方"<<endl;}else if((fabs(position_detec_y)<=0.03)&&position_detec_x<=-0.03){current_count= current_count + 3;//	cout<<"目标在正左方"<<endl;}else if((fabs(position_detec_y)<=0.03)&&position_detec_x>=0.03){	current_count= current_count + 4;//	cout<<"目标在正右方"<<endl;}else if((position_detec_x<-0.03)&&position_detec_y<-0.03){current_count= current_count + 5;//	cout<<"目标在左前方"<<endl;}else if((position_detec_x<-0.03)&&position_detec_y>0.03){current_count= current_count + 6;//	cout<<"目标在左后方"<<endl;}else if((position_detec_x>0.03)&&position_detec_y<-0.03){current_count= current_count + 7;//	cout<<"目标在右前方"<<endl;}else if((position_detec_x>0.03)&&position_detec_y>0.03){current_count= current_count + 8;	//	cout<<"目标在右后方"<<endl;}else if((fabs(position_detec_x)<=0.03)&&fabs(position_detec_y)<=0.03&&position_detec_x!=0&&position_detec_y!=0){current_count= current_count + 9;//	cout<<"目标在正中间"<<endl;}else{}//cout<<current_count<<endl;//cout<<last_count<<endl;if(current_count ==last_count&&last_count!=0){sum++;if(sum>=100){cout<<"目标锁定"<<endl;target_locked_area = current_count;cout<<target_locked_area<<endl;target_locked_flag = true;}}else{sum = 0;}last_count=current_count;current_count = 0;
}int main(int argc, char** argv)
{setlocale(LC_ALL, "");ros::init(argc, argv, "complete_mission");ros::NodeHandle nh; ros::Subscriber object_pos_sub = nh.subscribe<geometry_msgs::PointStamped>("object_position", 100, object_pos_cb); ros::Subscriber rc_in_sub = nh.subscribe<mavros_msgs::RCIn>("/mavros/rc/in", 100, rc_in_cb); ros::ServiceClient ctrl_pwm_client = nh.serviceClient<mavros_msgs::CommandLong>("mavros/cmd/command");ros::Time last_request = ros::Time::now();lib_pwm_control(50,50,50,50);ctrl_pwm_client.call(lib_ctrl_pwm);ctrl_msg.data = false;ros::Rate rate(20);  while(ros::ok()){visual_position("cylinder");//cout<<ctrl_msg.data<<endl;if(ctrl_msg.data){cout<<target_locked_area<<endl;//正前方if(target_locked_area==1||target_locked_area==5||target_locked_area==7){arm_first   = 100;arm_second	= 0;}else if(target_locked_area==2||target_locked_area==6||target_locked_area==8){arm_first   = 0;arm_second	= 100;}//中间else{arm_first   = 50; arm_second	= 50;  		}		lib_pwm_control(arm_first,arm_second,arm_third,arm_fourth);ctrl_pwm_client.call(lib_ctrl_pwm);if(lib_time_record_func(5.0,ros::Time::now())){arm_fourth = 100;ROS_INFO("执行抓取");	  	}}else{lib_pwm_control(100,50,50,50);ctrl_pwm_client.call(lib_ctrl_pwm);ROS_INFO("机械爪还原");}ros::spinOnce();rate.sleep();}return 0;
}