棋牌app制作教程_天津网站建设优选企业_长沙seo培训_东莞商城网站建设

报错信息

Error while launching program:
Could not find ARM device on the board for connection ‘Local’.
Check if the target is in:

1. Split JTAG - No operations are possible with ARM DAP.
2. Non JTAG bootmode - Bootrom may need time to enable DAP.
   Please try again.

Troubleshooting hints:

1. Check whether board is connected to system properly.
2. In case of zynq board, check whether Digilent/Xilinx cable switch settings are correct.
3. If you are using Xilinx Platform Cable USB, ensure that status LED is green.
   Could not find ARM device on the board for connection ‘Local’.
   Check if the target is in:
4. Split JTAG - No operations are possible with ARM DAP.
5. Non JTAG bootmode - Bootrom may need time to enable DAP.
   Please try again.

Troubleshooting hints:

1. Check whether board is connected to system properly.
2. In case of zynq board, check whether Digilent/Xilinx cable switch settings are correct.
3. If you are using Xilinx Platform Cable USB, ensure that status LED is green.

解决办法

将原来的SYSTEM删掉，重新生成一个即可

参考

1软件问题
2硬件问题